What's new

PLDT Boosteven R281 (Band Locking)

Status
Not open for further replies.
WesleyRM said:
backread kayo sir. nadito sa thread n ito ang information on downgrading
Click to expand...
boss alam mo ba command para ma save ang AT COMMAND NA GINAWA?

_ameee said:
reset mo po


baka wala ka pong net


stock yan kaya wag mo na iflash. mag sisi ka lang . wala ding added improvements yang update nila


di na yon nafix hahaha
Click to expand...
boss baka alam mo yung command para masave yung ginawa na AT COMMAND sa modem ..

jeromelaliagg said:
Set mo muna sa LTE only saka ka mag set ng band 7, kapag walang signal kasi automatic drop nyan sa 3G katulad ng sa ZTE MF286RA.
Click to expand...
boss jerome alam mo ba yung Command para masave yung ginawa na AT COMMAND sa modem?....

_ameee said:
pahingi din ng 3.0 pre. thanks
Click to expand...
boss paano ba masave yung AT COMMAND sa module.... di sya ma save.... pagka reboot at factory reset ko wala

PHC - JESS said:
Na try mo na ba boss sa r281 na mag lolock sya sa same band? Samin kasi band 3 malakas, kaso pag nilock ko sua sa band 3 lang e hindi naman sya nagiging 3/3.
Click to expand...
scan ka kung may frequebcy ka nasasagap na 1350 at 1775 mag 3/3 yan

eugxx said:
Pero mas malakas pa din s12 pro 😂
Click to expand...
malakas s12 pro sa di malayo sa tower
 
Last edited:
aldrinmeh2 said:
boss alam mo ba command para ma save ang AT COMMAND NA GINAWA?


boss baka alam mo yung command para masave yung ginawa na AT COMMAND sa modem ..


boss jerome alam mo ba yung Command para masave yung ginawa na AT COMMAND sa modem?....


boss paano ba masave yung AT COMMAND sa module.... di sya ma save.... pagka reboot at factory reset ko wala


scan ka kung may frequebcy ka nasasagap na 1350 at 1775 mag 3/3 yan


malakas s12 pro sa di malayo sa tower
Click to expand...
pano mag scan sir?
 
Sana may makatulong. Ano cpi login at password ng v5.4 bb3.3 sa i access ko sana r281 ko sa serial kaso dko alam. Salamat po.
 
LOLiPOPsheyt said:
so wala scan sa r281 sir?
Click to expand...
Meron yata... Pero maganda sa d2k Kase marami nasscan

H4wk3ye said:
PM mo si Rus o kaya si Jhonard para malagyan ng band locking yan. O kaya backread ka Lods
Click to expand...
Boss Isa Ako sa may d2k na nag change imei, tapos pagka reset ko not searching na sya... Kahit pa ibalik Yung orig imei nya... Di sya nakakasagap Ng signal...

Pero may na discover Ako na AT COMMAND para magka signal sya... Kaso manual ko sya iexecute kada reboot at factory reset....

Pinag tagpi tagpi ko lang mga AT COMMANDS.. na gets ko Ang iba pero di ko makuha Ang tamang commands para pag reboot mag auto scan na sya Ng network ...
 
Last edited:
rapain said:
try later paps thanks
Click to expand...

1MPACT2 said:
labas ko na downgrading ng smartbro 5.3/3.1
bukas dapat OTA bago kayu mag downgrade

AP: P28PLDT_AP_R281_V004.2
XML: 
<?xml version="1.0" encoding="US-ASCII"?>
<RGW>
    <param>
        <method>call</method>
        <session>000</session>
        <obj_path>ota</obj_path>
        <obj_method>download</obj_method>
    </param>
    <ota>
        <type>1</type>
        <size></size>
        <url>http://118.193.73.96/rBpL1GD5LRuARTDTAJwBEA63BtY899.bin</url>
        <username></username>
        <password></password>
        <sync></sync>
        <md5></md5>
    </ota>
</RGW>

CP: P28M26HAPLDT_CP_R281_V002.2
XML: 
<?xml version="1.0" encoding="US-ASCII"?>
<RGW>
    <param>
        <method>call</method>
        <session>000</session>
        <obj_path>ota</obj_path>
        <obj_method>download</obj_method>
    </param>
    <ota>
        <type>1</type>
        <size></size>
        <url>http://118.193.73.96/rBpL1GCvEpyAIgarAZVeUMSrB3A157.bin</url>
        <username></username>
        <password></password>
        <sync></sync>
        <md5></md5>
    </ota>
</RGW>

AP: You do not have permission to view the full content of this post. Log in or register now.
CP: You do not have permission to view the full content of this post. Log in or register now.
Click to expand...
almost a year akong gumagamit ng nginx pero naisipan kong magflash ng firmware na may bandlock at disalbe ota, kaso nasa latest version ako ng 4.3/2.3 na update so hindi na gumagana yung telnet.. hehe ang laking tulong ng downgrading na ito sa akin..

so far nakapagflash na ako ng firmware na may bandlock at disable ota.. hehehe
 
1659989477146.png


Nung una yung Software Version nya is 4.3
nag hahanap ako ng pang Downgrade nakita ko lang is AP sa Comment ni sir

Nakapag downgrade ako then nag proceed agad ako sa Disabled OTA and Bandlocking without knowing na meron pa pala sa CP which is included pala yung Baseband sa Downgrade... Ngayon paano ko ulit downgrade? ayaw via webspy nag try ako mag downgrade ulit... AP and CP di na gumana :( patulong po para ma completely Downgrade ko siya.. Salamat po!

1MPACT2 said:
labas ko na downgrading ng smartbro 5.3/3.1
bukas dapat OTA bago kayu mag downgrade

AP: P28PLDT_AP_R281_V004.2
XML: 
<?xml version="1.0" encoding="US-ASCII"?>
<RGW>
    <param>
        <method>call</method>
        <session>000</session>
        <obj_path>ota</obj_path>
        <obj_method>download</obj_method>
    </param>
    <ota>
        <type>1</type>
        <size></size>
        <url>http://118.193.73.96/rBpL1GD5LRuARTDTAJwBEA63BtY899.bin</url>
        <username></username>
        <password></password>
        <sync></sync>
        <md5></md5>
    </ota>
</RGW>

CP: P28M26HAPLDT_CP_R281_V002.2
XML: 
<?xml version="1.0" encoding="US-ASCII"?>
<RGW>
    <param>
        <method>call</method>
        <session>000</session>
        <obj_path>ota</obj_path>
        <obj_method>download</obj_method>
    </param>
    <ota>
        <type>1</type>
        <size></size>
        <url>http://118.193.73.96/rBpL1GCvEpyAIgarAZVeUMSrB3A157.bin</url>
        <username></username>
        <password></password>
        <sync></sync>
        <md5></md5>
    </ota>
</RGW>

AP: You do not have permission to view the full content of this post. Log in or register now.
CP: You do not have permission to view the full content of this post. Log in or register now.
Click to expand...
pano enable ota update?
 

Attachments

Last edited:
PHCJazzy said:
View attachment 2075226

Nung una yung Software Version nya is 4.3
nag hahanap ako ng pang Downgrade nakita ko lang is AP sa Comment ni sir

Nakapag downgrade ako then nag proceed agad ako sa Disabled OTA and Bandlocking without knowing na meron pa pala sa CP which is included pala yung Baseband sa Downgrade... Ngayon paano ko ulit downgrade? ayaw via webspy nag try ako mag downgrade ulit... AP and CP di na gumana :( patulong po para ma completely Downgrade ko siya.. Salamat po!


pano enable ota update?
Click to expand...
Flash nyo po stock firmware.
 
Rodney1993 said:
Mga master kunting katanungan po. Nag change IMEI ako sa r281 ko ng pang cp pwede paba ako mag change IMEI ulit ibabalik yung dating IMEI ng modem?
Click to expand...
pwedeng pwede, lagay mo sa imei_here 'yung imei ng modem mo
Code: 
ubus call version set_atcmd_info '{"atcmd":"AT*PROD=2"}'

ubus call version set_atcmd_info '{"atcmd":"AT*MRD_IMEI=U,0101,12NOV2010,imei_here"}'

ubus call version set_atcmd_info '{"atcmd":"AT*PROD=0"}
 
Status
Not open for further replies.

Similar threads

Popular Tags

936 access admin admin access antenna b312-939 b315s-936 bm622i bm622m broadband converge dsl firmware free mac free mac address globe globe at home help home huawei imbz internet jpotz lift mac mac 2015 mac add mac address mac address 2016 macs modem modem 936 od mac openline pldt prepaid router s10g smart tools tutorial unlock wifi wimax wimax & canopy modems yayadub zlt zlt s10g zte [gm]blackheaven

About this Thread

  • 5K
    Replies
  • 324K
    Views
  • 368
    Participants
Last reply from:
-Synntaxx

New Topics

Popular On This Forum

Online statistics

Members online
1,132
Guests online
5,120
Total visitors
6,252
Back
Top