Help Packet Tracer (4th Year BSIT)

[IkaMusume]

sino po marunong po mag packet tracer dito pa help po sa activities namin willing to pay po thanks in advance.

--pakidelete nalang po if bawal

 

[PHC-PROXYPIRATE]

Anu ba itratrace kapag packet tracer?

Yung packet ang itratrace?

 

[IkaMusume]

Anu ba itratrace kapag packet tracer?

Yung packet ang itratrace?

Packet tracer po sya for cisco po

 

[PHC-PROXYPIRATE]

Packet tracer po sya for cisco po

Wait lang parang similar sya sa Wireshark mag iisniff kanu

 

[IkaMusume]

View attachment 1615903
Wait lang parang similar sya sa Wireshark mag iisniff kanu

1. Perform VLSM using You do not have permission to view the full content of this post. Log in or register now. as IP block for LAN 1 and LAN 2. 2. Use first usable IP address for gigabitethernet ports. 3. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN1. 4. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN2. 5. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN3. 6. Use third usable IP address for PC. 7. Set first usable IP address for DCE serial ports. 8. Set second usable IP address for DTE serial ports. 9. Create VLAN10, VLAN20 and VLAN30. 10. Configure etherchannel group 1 using pagp protoccol. 11. Configure portfast for each switch. 12. Configure inter vlan. 13. Use multi-area OSPF as routing protocol with Process ID 1. Note: PC1 and PC2 should ping Laptop successfully. Note: PC2 should have access to R3 via ssh. Other Requirements: Use the following reference. Domain name: cisco.com Username: admin Password: cisco * Plain text passwords should be encrypted.

ganito boss oh

 

[IkaMusume]

1. Perform VLSM using You do not have permission to view the full content of this post. Log in or register now. as IP block for LAN 1 and LAN 2. 2. Use first usable IP address for gigabitethernet ports. 3. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN1. 4. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN2. 5. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN3. 6. Use third usable IP address for PC. 7. Set first usable IP address for DCE serial ports. 8. Set second usable IP address for DTE serial ports. 9. Create VLAN10, VLAN20 and VLAN30. 10. Configure etherchannel group 1 using pagp protoccol. 11. Configure portfast for each switch. 12. Configure inter vlan. 13. Use multi-area OSPF as routing protocol with Process ID 1. Note: PC1 and PC2 should ping Laptop successfully. Note: PC2 should have access to R3 via ssh. Other Requirements: Use the following reference. Domain name: cisco.com Username: admin Password: cisco * Plain text passwords should be encrypted.

ganito boss oh

BSIT po ako

 

[PHC-PROXYPIRATE]

1. Perform VLSM using You do not have permission to view the full content of this post. Log in or register now. as IP block for LAN 1 and LAN 2. 2. Use first usable IP address for gigabitethernet ports. 3. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN1. 4. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN2. 5. Use You do not have permission to view the full content of this post. Log in or register now. as network address for WAN3. 6. Use third usable IP address for PC. 7. Set first usable IP address for DCE serial ports. 8. Set second usable IP address for DTE serial ports. 9. Create VLAN10, VLAN20 and VLAN30. 10. Configure etherchannel group 1 using pagp protoccol. 11. Configure portfast for each switch. 12. Configure inter vlan. 13. Use multi-area OSPF as routing protocol with Process ID 1. Note: PC1 and PC2 should ping Laptop successfully. Note: PC2 should have access to R3 via ssh. Other Requirements: Use the following reference. Domain name: cisco.com Username: admin Password: cisco * Plain text passwords should be encrypted.

ganito boss oh

Ganto ba?
Here .

172.16.0.0/16 = AS31313 172.16.0.0/12 Internet Assigned Numbers Authority
10.10.10.0/30 = AS559 10.10.10.0/24 Internet Assigned Numbers Authority
11.11.11.0/30 = AS749 11.0.0.0/8 DoD Network
11.11.11.0/30 = AS749 11.11.11.0/24 DoD Network Information Center
12.12.12.0/30 = AS7018 12.0.0.0/8 AT&T Services, Inc.
12.12.12.0/30 = AS7018 12.0.0.0/9 AT&T Services, Inc.

 

[IkaMusume]

Ganto ba?
Here .

172.16.0.0/16 = AS31313 172.16.0.0/12 Internet Assigned Numbers Authority
10.10.10.0/30 = AS559 10.10.10.0/24 Internet Assigned Numbers Authority
11.11.11.0/30 = AS749 11.0.0.0/8 DoD Network
11.11.11.0/30 = AS749 11.11.11.0/24 DoD Network Information Center
12.12.12.0/30 = AS7018 12.0.0.0/8 AT&T Services, Inc.
12.12.12.0/30 = AS7018 12.0.0.0/9 AT&T Services, Inc.

wait po try kopo ginawa kopo kasi

 

[IkaMusume]

Ganto ba?
Here .

172.16.0.0/16 = AS31313 172.16.0.0/12 Internet Assigned Numbers Authority
10.10.10.0/30 = AS559 10.10.10.0/24 Internet Assigned Numbers Authority
11.11.11.0/30 = AS749 11.0.0.0/8 DoD Network
11.11.11.0/30 = AS749 11.11.11.0/24 DoD Network Information Center
12.12.12.0/30 = AS7018 12.0.0.0/8 AT&T Services, Inc.
12.12.12.0/30 = AS7018 12.0.0.0/9 AT&T Services, Inc.

 

[PHC-PROXYPIRATE]

View attachment 1615967

Oh ayan naman Pala lods eh .
Nakita ko ganyan sa YøùTùbé .

 

[IkaMusume]

Oh ayan naman Pala lods eh .
Nakita ko ganyan sa Y⊕ùTùbé .

pa send nung link sa yt lods

 

[ICE Coffee]

check ka lang sa YT or kay pareng google paps, buti nga ngayong panahon nyo madali na lang ang internet at mga computer, nung kami kung wala kang laptop mahirap talaga hirap pa sa internet umaasa na lang sa psiphon ahahahahaha

 

[Wu_Fei]

lods baka meron po kau jan packet tracer yung bago po .. baka pede po makahingi ..

nag try kasi ako mag reg puro failed . .di ko alam bakit ...

nag install ako nung luma pero my mga commands na di gumagana sa luma . .sa bago lang ..

lods baka pede po makahingi ng NEW PACKET TRACER .. di ok masabayan yung tutorials sa YøùTùbé gamit yung luma ...

salamat po