What's new

Paano gumawa ng usb on the go (otg) cable...!!!

Status
Not open for further replies.

noke_cent

Honorary Poster
good day mga bro... nais ko lamang ibahagi itong ginawa kong bagay na simple tipid at kapaki-paki nabang... at sa mga hindi pa nakakaalam,ito na yung pagkakataon nyo at pwede nyo rin gawin para malaman nyo kung totoo nga at subok na gagana sa inyong cp or tablet...

WHAT: USB ON THE GO (OTG) CABLE=FOR MOBILE AND TABLET

http://img132.imageshäçk.us/img132/6163/nokiaca157usbotg540x540.png

FUNCTION: CAN READ,PLAY, USB FLASHDRIVE,MOUSE,KEYBOARD,CAMERA THRU YOUR MOBILE PHONE AND TABLET...

HOW TO MAKE ???

HERE IS THE STEP BY STEP PROCEDURE...
IM SURE MA22WA KAYOMASASABI NYO NA OK NGA ITONG CABLE NA ITO..

MGA KAILANGAN UPANG MAKAGAWA NG (OTG) CABLE

*Generic microUSB cable
http://img208.imageshäçk.us/img208/7456/microusbcable540x360.jpg
*USB extension cord
http://img69.imageshäçk.us/img69/9583/usbextensioncable540x44.jpg
*Soldering Iron
*Wire ******** / Cutter
*Solder


INSTRUCTION

1.Cut and strip the extension cable at the male end for extra length. Keep the female end.
2.Snip the micro USB cable at the female end, right in front of the plug, for the most length possible. The extra length ensures you’ll have enough cable if anything goes wrong.
3.Next, match colors. Red to red, white to white, green to green, black to black.
4.Twist each pair together, then solder pin 4 and pin 5 together; effectively shorting them.
5.Solder each set together, shield it so as not to cause shorts (Heatshrink is ideal around each wire, but hard to do. Duct tape around each of the 4 small wires, then a large piece of heatshrink around the whole thing works as well.
IN SHORT GAYAHIN NYO ITONG GAYA NG NASA LARAWAN...

http://img233.imageshäçk.us/img233/8206/microusbtousb540x189.jpg

at ito NAMAN PARA HINDI TAYO MALITO KUNG SAN TAYO MAGSISISMULA NA MAG HINANG NG MGA WIRE...

SA AKIN YUNG MICROPIN B..
http://img208.imageshäçk.us/img208/2148/microusbtypeab540x163.jpg

ITO NAMAN YUNG FINISH PRODUCT KO...
SCREEN SHOT

http://img534.imageshäçk.us/img534/5194/scr000002se.jpg

http://img607.imageshäçk.us/img607/2967/scr000006f.jpg

USB FLASHDRIVE
http://img842.imageshäçk.us/img842/188/scr000003r.jpg

PC MOUSE
http://img204.imageshäçk.us/img204/8236/scr000007c.jpg... TESTED NA ITO SA NOKIA N8 KO... GAWA NARIN KAYO PARA MASUBUKAN NYO DIN KUNG WORKING SA PHONE NA GAMIT NYO... PERO SYEMPRE EXPECT NA NATIN NA GAGANA LANG DIN ITO SA NGA HIGH END UNIT like samsung android,nokia, tablet, and other supported device...sana nakatulong itong munti kong handog sa inyo salamat sa pag basa....





:kol
 
gumawa ako sarili kong ganyan gamit yung mga parts na di na ginagamit dito sa bahay. ginawa kung usb type yung charger ng nokia C1-01 ko. tanung ko lang kung pwede kong kabitan pa ng para sa connector sa PC ung sa ginawa kung charger. ung vcc at ground lang kasi nagamit ko para sa charger. ung D+ at D-, di ko nagamit.salamat po
 
Status
Not open for further replies.
Back
Top