Help Old modem as wifi extender

[Mark Fredgie]

How can i use my old modem/router as a wifi repeater/extender without using UTP cable but through wireless, is it possible?

 

[🤖]

Yes, it is possible to use your old modem/router as a wireless repeater or extender. This can be achieved by setting up a wireless bridge or wireless repeating function in the old modem/router.

The general steps to set up a wireless bridge or repeating function are as follows:

1. Connect your computer to the old modem/router using an Ethernet cable.
2. Log in to the modem/router's administration interface using a web browser. The address to access the interface should be printed on the modem/router or in the manual.
3. Look for the Wireless Bridge or Repeating function in the router's settings. The location of this setting may vary depending on the brand and model of your modem/router, but it should be under the Wireless menu.
4. Enable the wireless bridge or repeating function and enter the network name (SSID) and password of the main wireless network you want to extend.
5. Save the settings and unplug the Ethernet cable from your computer.
6. Place the old modem/router in a location where it can receive a strong wireless signal from the main wireless network.
7. Connect your devices to the old modem/router's wireless network and you should have extended Wi-Fi coverage.

Note that not all modems/routers support the wireless bridge or repeating function, so it's important to check the manual or manufacturer's website to confirm if this is possible with your device. Additionally, if the old modem/router is significantly outdated or has weak wireless capabilities, it may not be the best choice for extending your Wi-Fi network.

 

[Mark Fredgie]

Yes, it is possible to use your old modem/router as a wireless repeater or extender. This can be achieved by setting up a wireless bridge or wireless repeating function in the old modem/router.

The general steps to set up a wireless bridge or repeating function are as follows:

1. Connect your computer to the old modem/router using an Ethernet cable.
2. Log in to the modem/router's administration interface using a web browser. The address to access the interface should be printed on the modem/router or in the manual.
3. Look for the Wireless Bridge or Repeating function in the router's settings. The location of this setting may vary depending on the brand and model of your modem/router, but it should be under the Wireless menu.
4. Enable the wireless bridge or repeating function and enter the network name (SSID) and password of the main wireless network you want to extend.
5. Save the settings and unplug the Ethernet cable from your computer.
6. Place the old modem/router in a location where it can receive a strong wireless signal from the main wireless network.
7. Connect your devices to the old modem/router's wireless network and you should have extended Wi-Fi coverage.

Note that not all modems/routers support the wireless bridge or repeating function, so it's important to check the manual or manufacturer's website to confirm if this is possible with your device. Additionally, if the old modem/router is significantly outdated or has weak wireless capabilities, it may not be the best choice for extending your Wi-Fi network.

What if the modem does not have wireless bridge feature, is there any way to make it possible?

 

[🤖]

What if the modem does not have wireless bridge feature, is there any way to make it possible?

If your old modem/router doesn't have a wireless bridge feature, there are alternative ways to use it as a Wi-Fi extender. One solution is to use a third-party firmware that supports the wireless bridge or repeating function.

One popular third-party firmware is DD-WRT, which can be installed on many routers, including some older models that don't support wireless repeating. DD-WRT has a built-in wireless bridge and repeating function that can be used to extend the Wi-Fi coverage of your main network.

To install DD-WRT on your router, you need to check if your model is compatible with the firmware and follow the instructions carefully. Note that installing third-party firmware can be risky and may void your router's warranty, so proceed with caution.

Once you have installed DD-WRT on your router, you can set up the wireless bridge or repeating function by following the steps in the firmware's interface. The process is similar to the steps I mentioned earlier for setting up a wireless bridge or repeating function in the router's settings.

Another alternative is to use a wireless range extender or mesh network system instead of repurposing your old modem/router. These devices are specifically designed to improve Wi-Fi coverage and are often easier to set up and use than a DIY solution.

 

[Grhace]

YøùTùbé lods ..ganyan sakin mga lumang router ko ...ginamit ko as extender