What's new

Help Mga master... bm622i 2010 169 ip..

Status
Not open for further replies.
P

palapokzzz

Addict
sa mga master po jan . help nmn mga boss yung bm622i 2010 po toy ko na 169 IP . ntry ko po yung multicast pro khit ilang beses ko itry walang effect .. wat b mgandang gawin ?
 
Sort by date Sort by votes
magstatic ip ka lang solve na yan ..pasok ka sa ipv4 ito o

Description: Realtek PCIe GBE Family Controller

DHCP Enabled: Yes
IPv4 Address: 192.168.254.100
IPv4 Subnet Mask: 255.255.255.0


IPv4 Default Gateway: 192.168.254.1
IPv4 DHCP Server: 192.168.254.1
IPv4 DNS Servers: 8.8.8.8, 8.8.4.4 pagkatapos pasok ka as admin din yong sa dhcp check mo yong box din apply

or

Sir na FWD ang modem nyo need mag reflash ng Firmware dôwnlôad nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na
 
Upvote 0 Downvote
yun Autoconfiguration IPv4 address po ba boss? tsaka wala pong IP sa default getaway... e pm ko sayo boss ma3.. baka kasi personal na yun... sana reply ka dito sa thread para makita nang mga newbie kagaya koh..
 
Last edited:
Upvote 0 Downvote
boss bkit ganun. d nag running lights yung signal nung bm622i ko . sinunod ko nmn po yung instruction mabuti.. yung lan led lang ang blinking ng mabilis nung start ko yung multicast.. mag iisang oras n pro d nag blink yung signal .. my ibang solusyon pa ba boss n pede ko itry?
 
Upvote 0 Downvote
Ma3 said:
magstatic ip ka lang solve na yan ..pasok ka sa ipv4 ito o

Description: Realtek PCIe GBE Family Controller

DHCP Enabled: Yes
IPv4 Address: 192.168.254.100
IPv4 Subnet Mask: 255.255.255.0


IPv4 Default Gateway: 192.168.254.1
IPv4 DHCP Server: 192.168.254.1
IPv4 DNS Servers: 8.8.8.8, 8.8.4.4 pagkatapos pasok ka as admin din yong sa dhcp check mo yong box din apply

or

Sir na FWD ang modem nyo need mag reflash ng Firmware dôwnlôad nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na
Click to expand...





boss ayaw mag ilaw nung signal light nung wimax ko .. puro lan led lang ang nag bliblink .. wat po kaya prob. nun sir...
 
Upvote 0 Downvote
Ma3 said:
may tut dito yan search lang po nasa office kasi ako maya pag uwi ko hanapan kita ng tut pero try mo din mag search
Click to expand...

ok boss tinatry ko nga po ibang tut nla . pro d ko p rin po mapgana na mag bliblink yung signal led light.. halos parepareho lng po ng tut mo boss yung ibang nd2 . meron p bo ibang way or tut para sa 169 ip boss? TIA ...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Popular Tags

936 access admin admin access ang antenna b312-939 b315s-936 bm622i bm622i 2011 bm622m broadband converge dsl dv235t fiber fibr firmware globe globe at home home home wifi huawei imbz internet lift lte mac mac 2015 mac address modem openline password pldt pldt fibr prepaid prepaid wifi question router s10g signal sim smart smartbro wifi wimax wimax & canopy modems zlt zlt s10g zte

About this Thread

  • 35
    Replies
  • 3K
    Views
  • 5
    Participants
Last reply from:
Mister M

New Topics

Popular On This Forum

Online statistics

Members online
1,183
Guests online
5,401
Total visitors
6,584
Back
Top