Closed Lenovo a526 bootloop, any solution?

[eusy5212]

Ngrestart yung phone ko tapos ngbobootloop na sya, nitry ko tanggalin yung battery, pro pag binalik ko ulit, agad nanman syang ng bootloop, ngopen ng factory settings tapos bigla nanmang ng restart, wla nman akong ginawa, nka stock rom nga tapos unrooted pa, ano po ba dapat gawin? :-(

 

[Khim Briones]

[Custom ROM] A526
is based on a sink firmware ROW_031 for Lenovo a526


Download: You do not have permission to view the full content of this post. Log in or register now. You do not have permission to view the full content of this post. Log in or register now.
(You can see links before reply)

Firmware through SP Flash Tool: Before firmware carefully read the instructions through Firmware You do not have permission to view the full content of this post. Log in or register now. (hereinafter FT)
This Shading "Firmware" using specially designed for this program.

What you need:
USB data cable MediaTek USB VCOM driver are two types within the archive SP Flash Tool (all my firmware under CFT already contain it) is recommended to use the FT that goes in the archive Driver Installation

1. Turn off the phone. Thereafter, make a reset, there are different options for different models:

a) remove the battery and insert it after a few seconds (and do not include phone) .
b) remove the battery and insert in), press "Reset" button (for tablets) , etc. ...

2. First of all, you need to install MediaTek USB VCOM driver. necessary to open the "Device Manager" Windows, connect to the computer via a USB cable off phone. C button held down "Volume - " V "Device Manager" Windows, at the moment of the "Unknown device" click it "Prav.Kn.Myshi" and choose "Update Driver", then specify the path to the drivers. Some devices appear in "unknown" for a very short time during which you need to have time to put the driver. If you fail are doing with n1 again.

3. Disconnect the phone from the PC. Firmware all files:

4. Run SP Flash Tool, then click "Scatter loading" , to download the desired file scatter (MT6582_scatter_xxxxxx.txt, depending on which phone you have) for your device, you can ignore any messages that may appear. sure tick " DA DL All With Check Sum "

5. Turn off your phone. Reset the repeating n1

6. Click "Download" and connect your phone to your computer via USB data cable. C button held down "Volume - "

7. initialization process starts and you see a red progress bar display. Thereafter, the "Volume - "You can let go . After a red band pass, appears purple progress bar. Immediately after the purple stripes (and maybe even green), the download starts (you will see a yellow progress bar.) When a yellow stripe fill the progress bar (and perhaps More and blue or gray), you get a popup window with a green circle and the words OK, which means that the process completed successfully. Now you can disconnect the phone from the PC and turn it on. Before switching is desirable to remove and reinsert the battery, or press "Reset . " Firmware one or more modules (eg Mod rekaveri) !! If you want to fill only part of the "Firmware" or other such unit the same size, it is possible. BUT within this same "firmware" she must already be installed in the machine, or you will get a warning (in English) and shading will not work.

8. In the example shown, only poured rekaveri. Remove all marks except one (RECOVERY), and then click "Download" . Will warning because not all files are selected, this is normal. Click Yes to continue. begins to download the selected file (partition) and after a yellow stripe popup will appear with a green circle and OK. Note: If you fill in the unit files PRELOADER and DSP_BL from someone else (not your brand) firmware you may get " Brick " . So as someone else fill firmware can erase calibration data in your machine - you get a malfunctioning phone.


You can see links before reply
You can see links before reply

 

[Khim Briones]

XTRA..!!
You do not have permission to view the full content of this post. Log in or register now. (google) от Foxtrot_KZ[/url]
 
paki report nalang kung ok na po para ma close na

 

[Vash02]

Ate yan lng po ba ang iddload?