Closed LENOVO A328 UNBRICK

[unclebarbz]

mga sir, pahelp naman po sa pag uunbrick ng LENOVO A328. totally dead but detected on PC. paano kaya maffix to? help naman po. salamat

 

[kaika1]

HOW TO INSTALL LENOVO A328 STOCK ROM:

• Install USB drivers for Lenovo A328 that you have already downloaded.
• Download and extract stock rom and sp-flash tool files.
• Connect your Lenovo A328 to Computer, while holding the power key + volume up key. The PC will detect the new hardware, just ignore it.
• Remove USB data cable from PC and remove battery.
• Open SP flash tool software and click Scatter-loading.
  
  
• In the Scatter Loading field go to the folder where you extracted the Stock Rom files and select MT6752_Android_scatter.txt
  
  
  
  
• Then you click options ->Download -> then check DA DL all with checksum.
  
• On download tab, ensure you have selected download only option from dropdown menu, see below picture.
  
• Then, click download button on top right and connect your Lenovo A328 with USB cable in phone switch off position.
  
• Process will run automatic, and you can see the red stripe showing download percentage at bellow.
• When your process complete, you can see a green circle with tick mark.

You do not have permission to view the full content of this post. Log in or register now.
So, this was a simple tutorial to Install Lenovo A328 Stock Rom.

credit to modifyAndroid.com

PRE-REQUISITES FOR INSTALLING ROM:

• Lenovo A328 Stock Rom: You do not have permission to view the full content of this post. Log in or register now.
• SP Flash Tool : You do not have permission to view the full content of this post. Log in or register now.
• Lenovo A328 USB Driver : You do not have permission to view the full content of this post. Log in or register now.

 

[eh_ru]

Working sa akin TS. marming salamat ^_^

 

[Diefreestyle]

Tnc

 

[gsmsohel]

not working

 

[GreatPou]

HOW TO INSTALL LENOVO A328 STOCK ROM:

• Install USB drivers for Lenovo A328 that you have already downloaded.
• Download and extract stock rom and sp-flash tool files.
• Connect your Lenovo A328 to Computer, while holding the power key + volume up key. The PC will detect the new hardware, just ignore it.
• Remove USB data cable from PC and remove battery.
• Open SP flash tool software and click Scatter-loading.
  
  
• In the Scatter Loading field go to the folder where you extracted the Stock Rom files and select MT6752_Android_scatter.txt
  
  
  
  
  
  
• Then you click options ->Download -> then check DA DL all with checksum.
  You do not have permission to view the full content of this post. Log in or register now.
• On download tab, ensure you have selected download only option from dropdown menu, see below picture.
  You do not have permission to view the full content of this post. Log in or register now.
• Then, click download button on top right and connect your Lenovo A328 with USB cable in phone switch off position.
  You do not have permission to view the full content of this post. Log in or register now.
• Process will run automatic, and you can see the red stripe showing download percentage at bellow.
• When your process complete, you can see a green circle with tick mark.

You do not have permission to view the full content of this post. Log in or register now.
So, this was a simple tutorial to Install Lenovo A328 Stock Rom.

credit to modifyAndroid.com

PRE-REQUISITES FOR INSTALLING ROM:

• 
  
  
  • Lenovo A328 Stock Rom: You do not have permission to view the full content of this post. Log in or register now.
  • SP Flash Tool : You do not have permission to view the full content of this post. Log in or register now.
  • Lenovo A328 USB Driver : You do not have permission to view the full content of this post. Log in or register now.

boss nag error po
BROM ERROR: S_CHKSUM_ERROR (1041)

pag naka check da dl with checksum if uncheck po ok pero deadboat parin tsk tsk

 

[GreatPou]

Memory Test

============ Memory Detection Report ===========



Internal RAM:





External RAM:



Type = DRAM



Size = 0x40000000 (1024MB/8192Mb)



NAND Flash:



ERROR: NAND Flash was not detected!



EMMC:



EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)

EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)

EMMC_PART_RPMB Size = 0x0000000000400000(4MB)

EMMC_PART_GP1 Size = 0x0000000000000000(0MB)

EMMC_PART_GP2 Size = 0x0000000000000000(0MB)

EMMC_PART_GP3 Size = 0x0000000000000000(0MB)

EMMC_PART_GP4 Size = 0x0000000000000000(0MB)

EMMC_PART_USER Size = 0x00000000e9000000(3728MB)



UFS:



ERROR: UFS was not detected!



============ RAM Test ============



Data Bus Test:



[D0]

[D1]

[D2]

[D3]

[D4]

[D5]

[D6]

[D7]

[D8]

[D9]

[D10]

[D11]

[D12]

[D13]

[D14]

[D15]

[D16]

[D17]

[D18]

[D19]

[D20]

[D21]

[D22]

[D23]

[D24]

[D25]

[D26]

[D27]

[D28]

[D29]

[D30]

[D31]

OK!!



Address Bus Test:



[A1]

[A2]

[A3]

[A4]

[A5]

[A6]

[A7]

[A8]

[A9]

[A10]

[A11]

[A12]

[A13]

[A14]

[A15]

[A16]

[A17]

[A18]

[A19]

[A20]

[A21]

[A22]

[A23]

[A24]

[A25]

[A26]

[A27]

[A28]

[A29]

OK!!



RAM Pattern Test :

Writing ...

0x44332211,

0xA5A5A5A5,

0xA5A5A500,

0xA500A500,

0xA5000000,

0x00000000,

0xFFFF0000,

0xFFFFFFFF,

OK!!



Increment/Decrement Test:

Writing...

OK!!