how to reset the globe streamwatch xtreme router? (sei-120g)

[cottoncandy]

can't find videos or articles about how to properly reset the globe streamwatch xtreme router. pressing the reset button for any number of seconds is not working kasi so i think may iba pang dapat gawin. di ko na kasi maalala username or password ko sa gui 192.168.254.254 so i'm planning to default it na lang sana. i'd appreciate if anyone can help.

 

[rolyrod]

 

[kingpolybius]

Globe Streamwatch Xtreme Obtaining IP/DHCP error/unable to access dashboard/gateway after bridging fix

• Make sure to remember if you changed the IP address ng router. If so, that IP address will be the default GATEWAY address ng router. Kung hindi naman at nadisabled lang ang DHCP, mas madali. Defualt Gateway/IP address ng router is 192.168.254.254.
• Connect to Streamwatch Xtreme via LAN or WIFI but configure the IP address to STATIC and 1 unit less than the Gateway/IP address ng router. Example: If router’s IP address: 192.168.254.254 use STATIC IP address 192.168.254.253
• If using LAN on your PC/Laptop, don’t forget to disable and enable the network adapter to refresh the settings. This is usually automatic using WIFI.
• Then, on browser you can now access the dashboard again by typing the Gateway /IP address ng router. Example: 192.168.254.254
• Log in and do a factory reset para marefresh lahat. Hope this helps.
  
  Ung sa akin napalitan ko ung IP address ng router to 192.168.255.254 when bridging kaya ginamit ko STATIC IP address 192.168.255.253 to connect to the router. Buti nalang naalala ko pa. Akala ko brick na device ko.

This method fixed my DHCP problem. I already tried a lot of tutorials but this one is spot on. Thank you.

Regarding resetting this particular router, pushing the reset button is not working on my device.

 

[Ria na san]

same prob lahat hindi ma access kahit yun default gateway

 

[lolkill23]

This method fixed my DHCP problem. I already tried a lot of tutorials but this one is spot on. Thank you.

Regarding resetting this particular router, pushing the reset button is not working on my device.

nagana ba dhcp pra sa bridging ng pldt to globe xtreme?

 

[kingpolybius]

nagana ba dhcp pra sa bridging ng pldt to globe xtreme?

Yes. But currently, I'm using Globe UnliFiber

 

[lolkill23]

Yes. But currently, I'm using Globe UnliFiber

thanks. gusto ko kasi magamit internet ko pra sa globe xtreme

 

[kingpolybius]

thanks. gusto ko kasi magamit internet ko pra sa globe xtreme

Welcome. Hope mapagana mo, sobrang masusulit mo talaga yung xtremewatch.

 

[Mizzakiee]

This method fixed my DHCP problem. I already tried a lot of tutorials but this one is spot on. Thank you.

Regarding resetting this particular router, pushing the reset button is not working on my device.

may chance pa ba pag nakalimutan na pati yung pinalit na ip address ? ty ts sa sagot

 

[lolkill23]

Yes. But currently, I'm using Globe UnliFiber

kakatry ko plang at matagal nasa probinsya. d nagana sa akin kahit disable dhcp at nka ip ng pldt walang internet

 

[masterken14]

Up

Sana matulongan nyo ako nakalimutan ko IP ng GETWAY hayss di ko ma access.

Tapos Unidentified Network pag connect ko sa LAPTOP.

Sana matulongan nyo po ako need po kasi work from home.

up

 

[kahitsinonaako]

Up

Sana matulongan nyo ako nakalimutan ko IP ng GETWAY hayss di ko ma access.

Tapos Unidentified Network pag connect ko sa LAPTOP.

Sana matulongan nyo po ako need po kasi work from home.

up

sa akin ay maling ip nilagay ko sa aking sei 120g sa dashboard niya. so di na ngayon mapunta sa dashboard. baka may solution ka na diyan ssob?

 

[adema]

may solution po tayo jan gamit ang PC o laptop.

_connect via lan or wifi
_pumunta sa Control Panel\Network and Internet\Network Connections
_i-right click ang lan o wireless network kung saan ka naka connect
_click properties
_click ang mismong " internet protocol version4 (TCP/ipv4)" h'wag i uncheck
_click properties
_i type sa ip address 192.168.254.250 then enter
_i type sa default gateway 192.168.254.254
_i-check ang "validate setting upon exit"
_click advance settings then "OK"
_click "OK" again

punta kna sa 192.168.254.254
kung ayaw punta ka sa 192.168.254.250...

eto gumana saken! wew! salamat boss!!

 

[noeltambol]

Globe Streamwatch Xtreme Obtaining IP/DHCP error/unable to access dashboard/gateway after bridging fix

• Make sure to remember if you changed the IP address ng router. If so, that IP address will be the default GATEWAY address ng router. Kung hindi naman at nadisabled lang ang DHCP, mas madali. Defualt Gateway/IP address ng router is 192.168.254.254.
• Connect to Streamwatch Xtreme via LAN or WIFI but configure the IP address to STATIC and 1 unit less than the Gateway/IP address ng router. Example: If router’s IP address: 192.168.254.254 use STATIC IP address 192.168.254.253
• If using LAN on your PC/Laptop, don’t forget to disable and enable the network adapter to refresh the settings. This is usually automatic using WIFI.
• Then, on browser you can now access the dashboard again by typing the Gateway /IP address ng router. Example: 192.168.254.254
• Log in and do a factory reset para marefresh lahat. Hope this helps.
  
  Ung sa akin napalitan ko ung IP address ng router to 192.168.255.254 when bridging kaya ginamit ko STATIC IP address 192.168.255.253 to connect to the router. Buti nalang naalala ko pa. Akala ko brick na device ko.

Maraming salamat po! Nafix ko n po globe extreme ko.

 

[AUDREYRENZ]

oo nga nasa tabi nga ang problema is ung android os lang ang nag rereset hndi ung router setting un kc need nmin ma reset

same question po baka may nakakaalam paano makuha o mareset ang globe streamwatch router setting

 

[AUDREYRENZ]

same question po baka may nakakaalam paano makuha o mareset ang globe streamwatch router setting

salamat sa nagshare kaya pla di maaccess ay nakadebrand na ang globe streamwatch...

Step 1: Open the browser and type in the address bar 192.168.254.254
Step 2: Log in
Username: sztozed
Password: 83583000
This will be your admin access where you can access everything.
Click Home
From here you will see more information
Step 3: Click Device Settings
Step 4: Click Advance Settings
Step 5: Click MCC|MCC locking
Type here 51503 for Smart then click Add
Then type in 51505 for Sun again click Add.
51500 - Fix Line
51588 - Next Mobile
51518 - RED Mobile/Cure

- Then click apply, then Yes