Closed How to Repair FWD bm622,bm622m,bm622i and bm623 wimax

[baguhan6987]

NA FWD ba ang modem mo, bm622, bm622m, bm622i, and bm623 wimax. eto na ang pang repair sa mag modem nyo try at your own risk.

- No Light issue
- blinking lan LED
- No connectiong to LAN PC
- No signals
- No repair to your Modem
- Just software is needed
- Download the softaware

This are the fallowing side effect:

• No signal Lights
• My LAN continues Refresh connected disconnected if 622m firmware while on Greenpacket firmware LAN is normally connected.
• 622m web Gui status Ready

Other find a solution use Winpsreader every time you want to connect ( hustle sign)

How to Fix Restore your modem settings

Continues LAN and Ready on Status (Normally this must be connecting not Ready)
1. Get a Winspreader and Smart v7 firmware
2. Open a Winspreader browse the Smart v7 firmware Hit start.
3. Plug your Modem Power and Lan Cable the wait a few minutes....
4. check the web GUI .. type the 192.168.254.1 on your browser
5. If you Gui Change to Smart...




Open telnet 192.168.254.1
login: mt7109
password:wimax
sncfg dset ADMIN_NAME admin (Enter)
sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
sncfg commit (Enter)
/factoryreset.sh (Enter)

NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng Greenpacket palitan mo lang ng IP 192.168.254.1


6. After Reboot your default gateway should be 192.168.15.1 because that is the default IP for smart.
Open a browser type 192.168.15.1
log in user :admin pass:smart

7. Go to Management -->> Upgrade --->> browse your 622m firmware Hit upgrade
wait 10 to 15 minutes slowly but surely effective flashing...

8. After done Upgrade it will reboot hit that reboot and wait...

9. reboot done check ip still 192.168.15.1 (smart)
Open a browser type 192.168.15.1 then you will see PINK page with error link is like this You do not have permission to view the full content of this post. Log in or register now.

Now open a telnet again
Telnet 192.168.15.1

Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!
/factoryreset.sh (enter)

NOTE: wag n wag gagamitin eto pang factory /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun.


10. dahil nag factory reset tayo automatic walang telnet yan log in ka
username: user
password: 0SlO051O
Go to You do not have permission to view the full content of this post. Log in or register now. para maaccess telnet nio.....
CHECK TELNET and click apply...

11. Finally No signal Light lagyan ng signal lights

Now open a telnet again
Telnet 192.168.15.1

Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!
rm etc/default.cfg ( Enter )
reboot (Enter)



rereboot yan may ilaw na modem nyo. ..

Take Note yung original MAC and Serial nya sa sticker ay babalik parang brand new ulit yung modem nyo.. at kung signal light lang habol nyo skip nyo nalang mga ibang step diretso na kayo sa step 11




salamat sa naka diskubre naayos ko bm622m ko..

 

[un99oy]

para sa downgrade 623m to 22m ko nawala yong wifi led di ako maka connect baka pwede mo ako matulongan kung pano gamitin yan...

 

[brianjay77]

salamat po sa shae masubukan ko to sa bm622m ko.. na change ko kasi sa green packet tas ayon conected pa rin cya kaso wala na yung gui tining.nan ko ung ip 192.168.254.1 pa rin.. tenry ko open sa browser wala talaga pate telnet wala ren paran sa putty lang cya papasok.. hinitay ko lang ma dsconect para ma balik sa original frmware nya.. try ko toh.. salamat sa share..

 

[baguhan6987]

salamat po sa shae masubukan ko to sa bm622m ko.. na change ko kasi sa green packet tas ayon conected pa rin cya kaso wala na yung gui tining.nan ko ung ip 192.168.254.1 pa rin.. tenry ko open sa browser wala talaga pate telnet wala ren paran sa putty lang cya papasok.. hinitay ko lang ma dsconect para ma balik sa original frmware nya.. try ko toh.. salamat sa share..

mabisa yan boss parehas tau nangyari sa bm622m natin.. follow mo lang yan sure balik sa dati toy mo..

para sa downgrade 623m to 22m ko nawala yong wifi led di ako maka connect baka pwede mo ako matulongan kung pano gamitin yan...

boss sundin mo lang yan cgurado maaayos toy mo.. yung mga tools na kailangan mo madami naman naka kalat dian..

 

[un99oy]

baka mei tools ka dyan para dina ko na hanapin pa

 

[baguhan6987]

baka mei tools ka dyan para dina ko na hanapin pa

Boss sori ngaun lang naka reply.. boss wala ako link nung mga tools search mo lang sa google makukuha mo naman agad yan.. nag search lang kasi ako sa google.. tiyagain mona and your toy will be as good as brandnew..

 

[un99oy]

ok na modem ko boss mae wifi na ulit...tnx

 

[JACOBEAST]

Thanks sa tutorila ts

 

[baguhan6987]

ok na modem ko boss mae wifi na ulit...tnx

ayos! enjoy ur toy bro..

Thanks sa tutorila ts

 

[Shoh]

hi

 

[baguhan6987]

ok na modem ko boss mae wifi na ulit...tnx

nice! enjoy your toy..

 

[supergon]

paano po sa blank wan na bm622?

 

[baguhan6987]

paano po sa blank wan na bm622?

Sori boss hindi kopa alam pag blank wan.. madami tayong ka ts dian na makakatulong sayo basa ka lang dian..

 

[un99oy]

search mr google about blank wan...

 

[newbie002]

sirsaan nakaka dl ng smart v7? salamat po sa sasagot i have huawei na globe wimax bm622m pwede po ba to sir?

 

[un99oy]

smart v7

ano yan? tool or firmware?

 

[newbie002]

firmwre sir

sir nasa step number 5 na po ako di lang ako makapasok sa gui ng smartbro (192.168.254.1)