May old ROUTER ka ba na di na nagagamit? At gusto mo gawing wifi Extender. Tara Gawin na natin yan.
Sakin kase meron akong router na nabili sa walter yung mumurahin lang na CD-R king na tatak.
Halos same lang yung gagawin nyo sa kahit anong router basta ganito yung steps para di kayo ulit ulit. May files pala ako na nilagay jan so example lang yun.
I-try nyo muna at mag feedback kayo kung gumagana steps na ginawa ko.
INSTRUCTION:
TAPOS ayun yun lang! Ka Basic!
Good luck sana NAPAGANA nyo yung mga dating router nyo!!
Sakin kase meron akong router na nabili sa walter yung mumurahin lang na CD-R king na tatak.
Halos same lang yung gagawin nyo sa kahit anong router basta ganito yung steps para di kayo ulit ulit. May files pala ako na nilagay jan so example lang yun.
I-try nyo muna at mag feedback kayo kung gumagana steps na ginawa ko.
INSTRUCTION:
- Go to You do not have permission to view the full content of this post. Log in or register now. log in username: admin password: admin
- Click Wireless Setting > Basic see picture below:
- Change Network Name > WIFI ba to? then apply (sample name and password lang to bahala na kayo sa naming at password)
- Wait for the router to blink and show WIFI ba to? Name at the wifi scanner and then connect again to You do not have permission to view the full content of this post. Log in or register now.
- Now go to Security and change the Security mode to WPA-PSK.
- Below WPA click AES and enter the Pass Phrase or password of wifi : Wag-ireset@14. See below picture
- Wait for the router to blink and show WIFI ba to? Name at the wifi scanner and then connect again this time put the password: Wag-ireset@14 then connect to You do not have permission to view the full content of this post. Log in or register now.
- After connecting last step is to change the IP address in internet setting 192.168.0.1 change to 192.168.0.254.
- Go to DHCP Type change to Disable , then click apply. See picture below.
- Wait for the router to blink. After that you can connect it to the LAN outside Remember put the LAN in the number 1.
- Again if things don’t work you need to click the reset button in the backside of the router besides the power cord. Press it 10 seconds and wait for the router to blink. And repeat step 1 to 10.
TAPOS ayun yun lang! Ka Basic!
Good luck sana NAPAGANA nyo yung mga dating router nyo!!