Closed How to boot flash drive

[Feui]

May Mga NEC Laptop User po ba dito? Ask lang po kung pano i boot yung FlashDrive sa Nec Laptop Reformat PC lang po

 

[Shinsuke Nishizono]

Anong model ng NEC mo?

 

[Skitso]

1. Insert a USB flash drive into a running computer.
   
   
2. Open a Command Prompt window as an administrator.
   
   
3. Type diskpart.
   
   
4. In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
   
   
5. At the command prompt, type select disk <X>, where X is the drive number or drive letter of the USB flash drive, and then click ENTER.
   
   
6. Type clean, and the click ENTER. This command deletes all data from the USB flash drive.
   
   
7. To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.
   
   
8. To select the partition that you just created, type select part 1, and then click ENTER.
   
   
9. To format the partition, type format fs=ntfs quick, and then click ENTER.
   
   Important
   
   If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
   
   
10. Type active, and then click ENTER.
    
    
11. Type exit, and then click ENTER.
    
    
12. When you finish preparing your custom image, save it to the root of the USB flash drive.
    

Or use Rufus application

 

[yunan0]

Poweriso 100% Free and fast may option dun brad na create bootable usb

 

[Feui]

NEC VersaPro? Hindi ko sure e Sa Pinsan ko kasi to pinapaayos nya lang sakin Yun lang nakalagay e

Anong model ng NEC mo?

 

[Feui]

1. Insert a USB flash drive into a running computer.
   
   
2. Open a Command Prompt window as an administrator.
   
   
3. Type diskpart.
   
   
4. In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
   
   
5. At the command prompt, type select disk <X>, where X is the drive number or drive letter of the USB flash drive, and then click ENTER.
   
   
6. Type clean, and the click ENTER. This command deletes all data from the USB flash drive.
   
   
7. To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.
   
   
8. To select the partition that you just created, type select part 1, and then click ENTER.
   
   
9. To format the partition, type format fs=ntfs quick, and then click ENTER.
   
   Important
   
   If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
   
   
10. Type active, and then click ENTER.
    
    
11. Type exit, and then click ENTER.
    
    
12. When you finish preparing your custom image, save it to the root of the USB flash drive.

Or use Rufus application

Paps Wait. Sa Rufus kase tinary ko tas sabi Error while partitioning daw then nag search ako pano i fix tas walang result pero eto try ko to Thanks

 

[roboto]

Galing ng yumi ang bilis

 

[Winnie_Shaddy]

Galing ng yumi ang bilis

Paturo naman kase hindi macomplete yung reformat sa ntfs

 

[roboto]

Paturo naman kase hindi macomplete yung reformat sa ntfs

poweriso tol mabilis din at walang failed , madali lang din gamitin

 

[jjca]

Yes power iso gamit ko walang palya sakin kaya hindi na ako ng try na iba. Try mo din

 

[Winnie_Shaddy]

poweriso tol mabilis din at walang failed , madali lang din gamitin

Hindi na ba kailangan gawin ntfs dun kase ako nag kakaproblema e

 

[roboto]

Hindi na ba kailangan gawin ntfs dun kase ako nag kakaproblema e

poweriso na gumagawa nun klik sa lang sya na bahala