Na try ko na po lahat realtek ..walang gumana , laging naka yellow flag kahit i update driver ko ,tapos kapag tinignan ko ung properties, nakalagay dun "this device is not working properly"tpos may nakalagay na code10
May corrupted driver ka dyan or outdated
Try this just in case
Common resolutions for Code 10 error
Try any of the following common resolutions to resolve the problem:
Update the drivers for this device
To do this, follow these steps:
In Device Manager, click the Driver tab in the device's Properties dialog box.
Click Update Driver to start the Hardware Update Wizard.
Follow the instructions to update the driver.
Note You may be prompted to provide the path of the driver. Windows may have the driver built-in, or the driver files may still be installed from the last time that you set up the device. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor's website.
Run an automated troubleshooting service
Run the Hardware devices are not working or are not detected in Windows troubleshooter from the Microsoft Support website.
Additional troubleshooter for USB devices
If you encounter the Code 10 error on devices connected by using a USB port, you may also try the Diagnose and fix Windows USB problems automatically troubleshooter.
Pag wala pa rin need to bring it to the service center kasi iboot up nila yan.