PHC - Naethan
Forum Expert
- Joined
- Dec 27, 2016
- Posts
- 3,374
- Reaction
- 18,120
- Points
- 2,599
- Age
- 22
Good Mornight mga ka PHC
Share na natin baka mapanis daw ehh, Sa inyo na to..
At sa mga ka TeaMates ko rin dito, wag lng kayo sa akin mag pasalamat..
Get To The POINT na!
DOs
Choose & Change Your APN
a. Choose internet.globe.com.ph APN
Set & Change APN TYPE
APN Protocol: PAP
APN Type: bip,default
- Fast Connect!
TIPs
Ang Secreto sa No Load sa mga di pa nakaka alam is BYTE DELAY, byte delay between the [Protocol], and Use [lf] instead of [cr], Yes you heard it right..
And Dont use Double EOL..
How To Perform it?
Simply adding some SPACE/Delay_Split (byte delay) from it, Just like this..
Ex:
SOCKSIP Setup
[protocol]_________[lf]Host: yourpayload[lf]
INJECTOR Setup
[delay_split][protocol]_______[lf]Host: yourpayload[lf]
or
[delay_split][protocol][lf]Host: yourpayload[lf]
- Yung Ganto "______" Space yan, Bawal kase sa Forum Natin..
*In HTTP Injector
a. Go To Buffer Size, And Change this
Send: 8192
Recieve: 8192
or
Send: 32768
Recieve: 32768
8192 (Microsoft Default Size)
32768 (TCP Default size)
- Less CDC
*Hanggat mas maraming Space, Matagal ang Connection..
*Para sakin mas BETTER na gamitin niyo si SOCKS, kase it can handle SMALL PACKETS and BROKEN PIPE in this kind of situation..
Bakit CDC?
CDC tlga tong way nato, Kase ung ganitong way if you notice, Its Called a BROKEN PIPE..
Instead nalang kung gamit niyo ung katulad ng akin..
At wala tlga stable na Broken PIPE.. Broken PIPE kase ang no load sa ganitong way ngayun, Pero sa katotohanan di tlga accept to sa mga Request Headers..
GLOSSARY
APN - Access Point Name
[protocol] - HTTP/1.1 "No Load"
[lf] - Line Field, New Line, For next DATA, Sagot sa no load
[cr] - Carriage Return, For Data Replacement, Wag mo gagamitin to para less cdc, Di to accept sa no load natin
EOL - End of Line [crlf], [lf][cr], [crlf][crlf].. Dont Use Both..
[delay_split] - 1000ms Delay of Connection..
Broken Pipe - The write error: Broken pipe message refers to a writing process that tries to write to a pipe with no readers left on the reading end of that pipe and the special circumstance that the SIGPIPE signal is set to be ignored either by the current or the parent process.
- Naethan
Share na natin baka mapanis daw ehh, Sa inyo na to..
At sa mga ka TeaMates ko rin dito, wag lng kayo sa akin mag pasalamat..
Get To The POINT na!
DOs
Choose & Change Your APN
a. Choose internet.globe.com.ph APN
Set & Change APN TYPE
APN Protocol: PAP
APN Type: bip,default
- Fast Connect!
TIPs
Ang Secreto sa No Load sa mga di pa nakaka alam is BYTE DELAY, byte delay between the [Protocol], and Use [lf] instead of [cr], Yes you heard it right..
And Dont use Double EOL..
How To Perform it?
Simply adding some SPACE/Delay_Split (byte delay) from it, Just like this..
Ex:
SOCKSIP Setup
[protocol]_________[lf]Host: yourpayload[lf]
INJECTOR Setup
[delay_split][protocol]_______[lf]Host: yourpayload[lf]
or
[delay_split][protocol][lf]Host: yourpayload[lf]
- Yung Ganto "______" Space yan, Bawal kase sa Forum Natin..
*In HTTP Injector
a. Go To Buffer Size, And Change this
Send: 8192
Recieve: 8192
or
Send: 32768
Recieve: 32768
8192 (Microsoft Default Size)
32768 (TCP Default size)
- Less CDC
*Hanggat mas maraming Space, Matagal ang Connection..
*Para sakin mas BETTER na gamitin niyo si SOCKS, kase it can handle SMALL PACKETS and BROKEN PIPE in this kind of situation..
Bakit CDC?
CDC tlga tong way nato, Kase ung ganitong way if you notice, Its Called a BROKEN PIPE..
Instead nalang kung gamit niyo ung katulad ng akin..
At wala tlga stable na Broken PIPE.. Broken PIPE kase ang no load sa ganitong way ngayun, Pero sa katotohanan di tlga accept to sa mga Request Headers..
GLOSSARY
APN - Access Point Name
[protocol] - HTTP/1.1 "No Load"
[lf] - Line Field, New Line, For next DATA, Sagot sa no load
[cr] - Carriage Return, For Data Replacement, Wag mo gagamitin to para less cdc, Di to accept sa no load natin
EOL - End of Line [crlf], [lf][cr], [crlf][crlf].. Dont Use Both..
[delay_split] - 1000ms Delay of Connection..
Broken Pipe - The write error: Broken pipe message refers to a writing process that tries to write to a pipe with no readers left on the reading end of that pipe and the special circumstance that the SIGPIPE signal is set to be ignored either by the current or the parent process.
#Credits to @ME, [USER=394337]PHC Keep-Alive[/USER] , And [USER=503943]BRETTA[/USER] for us, helping each other..
#STAYSAFE - PH
- Naethan
Last edited: