- Joined
- Mar 31, 2015
- Posts
- 784
- Solutions
- 1
- Reaction
- 428
- Points
- 346
Flashing w/ PC (Stock Firmware)
REQUIREMENTS:
Windows Desktop Or Laptop
USB Cable
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
Follow these steps:
1. You must download all the requirements first.
2. Install the MT65xx USB Preloader driver For some reason after you have installed the driver, you will see an exclamation mark in device manger, just ignore.
3. Extract SP Flash Tool and the Firmware you downloaded then put it to the folder that you can easily find.
4. Open SP Flash tool folder and run flash_tool.exe. For Windows 7 and 8 users, you must run it as administrator.
5. From the main screen of SP Flash tool, click scatter loading button and browse the scatter.txt file in stock ROM folder.
6. Uncheck preloader.bin.
7. Turn off your Cherry Mobile Flare S3 and remove the battery.
8. Now click the Download button. Plug your device into the computer through USB cable.
9. The process should start once you see a yellow progress bar at the bottom of SP Flash tool.
10. A green with “check” symbol will appear once the process has been finished. Reboot your device. Do not panic it take 5 or more minutes to boot.
Follow these steps and the firmware of your phone will be as good as fresh from the time you bought it !
RP. Enjoy!
REQUIREMENTS:
Windows Desktop Or Laptop
USB Cable
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.
Follow these steps:
1. You must download all the requirements first.
2. Install the MT65xx USB Preloader driver For some reason after you have installed the driver, you will see an exclamation mark in device manger, just ignore.
3. Extract SP Flash Tool and the Firmware you downloaded then put it to the folder that you can easily find.
4. Open SP Flash tool folder and run flash_tool.exe. For Windows 7 and 8 users, you must run it as administrator.
5. From the main screen of SP Flash tool, click scatter loading button and browse the scatter.txt file in stock ROM folder.
6. Uncheck preloader.bin.
7. Turn off your Cherry Mobile Flare S3 and remove the battery.
8. Now click the Download button. Plug your device into the computer through USB cable.
9. The process should start once you see a yellow progress bar at the bottom of SP Flash tool.
10. A green with “check” symbol will appear once the process has been finished. Reboot your device. Do not panic it take 5 or more minutes to boot.
Follow these steps and the firmware of your phone will be as good as fresh from the time you bought it ! RP. Enjoy!
Last edited by a moderator: