Accepting re-flashing/unlocking of B525s-65a/Mamba using Optus FW
Requirements:
1. Internet Connection
2. PC/Laptop
3. Usb Male to Male
4. Anydesk
20% Goes to donation
Credits: Zander Mazda
Price: ₱400
Main features: No borloloy, clean build and clean install. Base on stock firmware or firmware1.bin in optus ota update.
4G - LTE (4G)
3.5G - DC-HSPA+ (3G) / HSPA+ (3G)
3G - HSPA (3G) / HSUPA (3G) / HSDPA (3G) / UMTS (3G)
2G - GPRS (2G) / GSM (2G)
Requirements:
1. Internet Connection
2. PC/Laptop
3. Usb Male to Male
4. Anydesk
20% Goes to donation
Credits: Zander Mazda
Price: ₱400
Main features: No borloloy, clean build and clean install. Base on stock firmware or firmware1.bin in optus ota update.
- Fix nvram image for bands and hardware configs of B525s-65a version. (Note: For B525s-65a only! Do not flash in B525s-95a and B525s-23a, nvram is not made for that version.)
- Change networks type name.
4G - LTE (4G)
3.5G - DC-HSPA+ (3G) / HSPA+ (3G)
3G - HSPA (3G) / HSUPA (3G) / HSDPA (3G) / UMTS (3G)
2G - GPRS (2G) / GSM (2G)
- Add mobile number, wan ip and signal information in homepage.
- Fix 51566 (DITO) network name and apn auto configuration.
- Working in HUAWEI HiLink (Mobile WiFi) and HUAWEI AI Life application, tested in iOS and Android.
- Enable SMS center number and validity in SMS.
- Enable Phonebook.
- Enable all bands and multi selector in 4G, 3G and 2G. (Default bands in optus firmware is 1,3,7,8,28 and 40 only.)
- Enable VoLTE.
- Enable L2TP and PPTP VPN client. (Working, tested on my server.)
- Enable WiFi Hardware in 2.4GHz (b/g/n) and 5GHz (a/n/ac).
- Enable DNS server manually in DHCP.
- Enable VoIP menu.
- Enable Bridge Mode.
- Add more details in device information.
- Enable set manually in time service settings.
- Enable USSD.
- Working USB Printer and Samba Server in USB. (Samba server is working in all file system, tested on my UGreen Enlosure with 1TB [NTFS File System].)
- Add BusyBox v1.31.0 /system/bin/busybox-armv7.
- Add kpatch.ko module in startup to enable writing in nvram or datalock is set to 0 /system/xbin/kpatch.ko.
- Enable adbd in startup for adb connect in modem ip address /system/xbin/adbd.
- Add atc for AT Commands /system/xbin/atc.
- No disconnection issue in router like MikroTik (RouterOS).
- Same speed in WiFi (wlan / Wireless LAN) and Ethernet port or via cable.
Last edited: