Tools B312-939 modem admin access

[_ameee]

https://phcorner.net/threads/b312-939-and-other-huawei-modems-full-admin-access-utility-tool.977825/

 

[_ameee]

aHR0cHM6Ly93d3cueW91dHViZS5jb20vd2F0Y2g/dj15ODM5OXJNUi0yWQ==

use base64decoder.org mga lods para maunlock yung download site.

 

[_ameee]

aHR0cHM6Ly93d3cueW91dHViZS5jb20vd2F0Y2g/dj15ODM5OXJNUi0yWQ==

use base64decoder.org mga lods para maunlock yung download site.

 

[jals]

1. Go to 192.198.254.254
2. Login using your credentials
3. Device Setting
4. Advance Settings
5. Click DHCP
6. In the url address bar you will see You do not have permission to view the full content of this post. Log in or register now. change the #router_setting using one of your preferred setting in the list below.
7. Example: You do not have permission to view the full content of this post. Log in or register now.
8. Press enter on the keyboard and now you can configure or change a setting.
9. Apply. (If the device asks for a “reboot/restart” just click okay.)


Note: make sure to always click DHCP before changing the url.


Here are the list of settings and their function:
#apn_setting - APN Setting
#net_lockpci - Cell ID Locking
#flow_setting - Internet / Data Limiter
#nat - NAT Disable/Enable
#l2tp - Virtual Private Network
#unlock - Input Network Unlock Code
#mcc_mnc_locking - Network Lock Disable/Enable(Openline) - Popular Setting
#frequency - Frequency Band Selection - Popular Setting
#system_upgrade - Firmware Upgrade
#net_select - Network Selection (4G/3G/2G)
#ussd - USSD Dialer (works on 3G connection only)

Credits to Keith Rivera YT Channel for the tutorial.

Hnd nmn pwd sa mga model B312 939 yan

 

[mhelbugs]

sir dko mapa gana

[XX='DarkResurrection, c: 53325, m: 530020'][/XX]

 

[Espadajp]

Sino po dito marunong nag admin access B312-393 ung free lang sana

 

[Espadajp]

Paano mag admim access sa b312-939

 

[Espadajp]

Sino po dito marunong nag admin access B312-393 ung free lang sana

939

 

[thisiskhen]

Di ko po gets

 

[Espadajp]

Free ba yan bos

 

[sunnybear]

password: tripledoubleyoudot. blogspot.com

paki tanggal nalang yung smiley faces

 

[dave jame]

939 sabi di zlt

 

[zap14]

Wala na ba to lods?

 

[JohnReyTV]

end nabato?

 

[JohnReyTV]

waiting sa free admin access na wlang bayad or tools

 

[monxkida2]

1. Go to 192.198.254.254
2. Login using your credentials
3. Device Setting
4. Advance Settings
5. Click DHCP
6. In the url address bar you will see You do not have permission to view the full content of this post. Log in or register now. change the #router_setting using one of your preferred setting in the list below.
7. Example: You do not have permission to view the full content of this post. Log in or register now.
8. Press enter on the keyboard and now you can configure or change a setting.
9. Apply. (If the device asks for a “reboot/restart” just click okay.)


Note: make sure to always click DHCP before changing the url.


Here are the list of settings and their function:
#apn_setting - APN Setting
#net_lockpci - Cell ID Locking
#flow_setting - Internet / Data Limiter
#nat - NAT Disable/Enable
#l2tp - Virtual Private Network
#unlock - Input Network Unlock Code
#mcc_mnc_locking - Network Lock Disable/Enable(Openline) - Popular Setting
#frequency - Frequency Band Selection - Popular Setting
#system_upgrade - Firmware Upgrade
#net_select - Network Selection (4G/3G/2G)
#ussd - USSD Dialer (works on 3G connection only)

Credits to Keith Rivera YT Channel for the tutorial.

Hindi gumagana sir. Lumalabas kapag ni-rereplace ng "#mcc_mnc_locking". Maraming YøùTùbé tutorials pero puro naman panloloko. Admin password na talaga yon ini-input nila, hindi user pero nilalagay parin nila na user ang username. May nakita akong isang video, isang technician, nirereformat/nirereprogram/nirere-install niya ang modem through computer. The sad part is di na niya dinitalye ang software/program na ginamit niya at focus lang siya sa pagdedemo paano gawin. Hayz

 

[kyutkopromise]

You do not have permission to view the full content of this post. Log in or register now.

Ano po pass

 

[xhit69]

1. Go to 192.198.254.254
2. Login using your credentials
3. Device Setting
4. Advance Settings
5. Click DHCP
6. In the url address bar you will see You do not have permission to view the full content of this post. Log in or register now. change the #router_setting using one of your preferred setting in the list below.
7. Example: You do not have permission to view the full content of this post. Log in or register now.
8. Press enter on the keyboard and now you can configure or change a setting.
9. Apply. (If the device asks for a “reboot/restart” just click okay.)


Note: make sure to always click DHCP before changing the url.


Here are the list of settings and their function:
#apn_setting - APN Setting
#net_lockpci - Cell ID Locking
#flow_setting - Internet / Data Limiter
#nat - NAT Disable/Enable
#l2tp - Virtual Private Network
#unlock - Input Network Unlock Code
#mcc_mnc_locking - Network Lock Disable/Enable(Openline) - Popular Setting
#frequency - Frequency Band Selection - Popular Setting
#system_upgrade - Firmware Upgrade
#net_select - Network Selection (4G/3G/2G)
#ussd - USSD Dialer (works on 3G connection only)

Credits to Keith Rivera YT Channel for the tutorial.

boss di naman yan ang nalabas sa b312-939
ito po nalabas na add sa dhcp You do not have permission to view the full content of this post. Log in or register now.

 

[pugkaka]

aHR0cHM6Ly93d3cueW91dHViZS5jb20vd2F0Y2g/dj15ODM5OXJNUi0yWQ==

use base64decoder.org mga lods para maunlock yung download site.

naka private na po ung video. baka po pwede ulit nyo ma share. tnx!

 

[newknaber]

admin access generator for android (APK)
wait nyo na lang ulit mamigay ng access si boss jerome
You do not have permission to view the full content of this post. Log in or register now.