Closed About wiregard PC

[ZenKurtXhyle]

sa mga master diyan baka may alam kayo panu mafix to gamit ko windows 764bit...

 

[WraithKing0831]

Ang alin?

mapagana .

 

[marksemaj]

ganyan din sakin may error pag wireguard client gamit ko

Try mo to tunsafe same lang to sa wireguard
You do not have permission to view the full content of this post. Log in or register now.

 

[RabujerXxX]

same error sakin tatlong pc talaga ayaw......win7 64bit OS ko........

 

[WraithKing0831]

same error sakin tatlong pc talaga ayaw......win7 64bit OS ko........

vps ka din?

 

[PHC-eftabs813]

try this app
You do not have permission to view the full content of this post. Log in or register now.

 

[ZenKurtXhyle]

try this app
You do not have permission to view the full content of this post. Log in or register now.

boss penge config

 

[PHC-eftabs813]

copy mo lang ito
# This is a sample config file for TunSafe. It uses the same syntax as
# WireGuard's wg-quick tool

[Interface]

# The private key of this computer. This is a secret key, don't give it out.
# To convert it to a public key you can go to 'Generate Key Pair' in TunSafe.
PrivateKey = WCtYsvn21hQr5viWRn7Kyr6w3RVXPt51DdSkIwcyJVQ=
# Whether we want to bind a port to allow others to initiate connections to us.
# Please ensure this port is mapped in your router.


# Switch DNS server while connected
DNS = 116.50.176.113

# The addresses to bind to. Either IPv4 or IPv6. /31 and /32 are not supported.
Address = 156.154.71.26/32



# Whether to block all access to Internet that doesn't go through tunsafe.
# Note that Internet will keep being blocked even after TunSafe is restarted.
# Possible values (comma separated):
# route - Blocks all traffic using null route entries
# firewall - Blocks all traffic except TunSafe through the Windows firewall
# on - Uses the default block mechanism
# off - Turns off blocking
# BlockInternet = route, firewall

[Peer]
# The public key of the peer. Do not use the private key here. Use the 'Generate Key Pair'
# function in TunSafe to convert a private key to a public key.
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
# It's also possible to use a preshared key for extra security
# PresharedKey = SNz4BYc61amtDhzxNCxgYgdV9rPU+WiC8woX47Xf/2Y=

# The IP range that we may send packets to for this peer.
AllowedIPs = 0.0.0.0/0

# Address of the server
Endpoint = 162.159.192.9:2408

# Send periodic keepalives to ensure connection stays up behind NAT.
PersistentKeepalive = 25

 

[PHC Unknown]

same error naghahanap ng sagot win 7 64bit

 

[WraithKing0831]

copy mo lang ito
# This is a sample config file for TunSafe. It uses the same syntax as
# WireGuard's wg-quick tool

[Interface]

# The private key of this computer. This is a secret key, don't give it out.
# To convert it to a public key you can go to 'Generate Key Pair' in TunSafe.
PrivateKey = WCtYsvn21hQr5viWRn7Kyr6w3RVXPt51DdSkIwcyJVQ=
# Whether we want to bind a port to allow others to initiate connections to us.
# Please ensure this port is mapped in your router.


# Switch DNS server while connected
DNS = 116.50.176.113

# The addresses to bind to. Either IPv4 or IPv6. /31 and /32 are not supported.
Address = 156.154.71.26/32



# Whether to block all access to Internet that doesn't go through tunsafe.
# Note that Internet will keep being blocked even after TunSafe is restarted.
# Possible values (comma separated):
# route - Blocks all traffic using null route entries
# firewall - Blocks all traffic except TunSafe through the Windows firewall
# on - Uses the default block mechanism
# off - Turns off blocking
# BlockInternet = route, firewall

[Peer]
# The public key of the peer. Do not use the private key here. Use the 'Generate Key Pair'
# function in TunSafe to convert a private key to a public key.
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
# It's also possible to use a preshared key for extra security
# PresharedKey = SNz4BYc61amtDhzxNCxgYgdV9rPU+WiC8woX47Xf/2Y=

# The IP range that we may send packets to for this peer.
AllowedIPs = 0.0.0.0/0

# Address of the server
Endpoint = 162.159.192.9:2408

# Send periodic keepalives to ensure connection stays up behind NAT.
PersistentKeepalive = 25

thanks dito master.. will try latee

 

[ZenKurtXhyle]

copy mo lang ito
# This is a sample config file for TunSafe. It uses the same syntax as
# WireGuard's wg-quick tool

[Interface]

# The private key of this computer. This is a secret key, don't give it out.
# To convert it to a public key you can go to 'Generate Key Pair' in TunSafe.
PrivateKey = WCtYsvn21hQr5viWRn7Kyr6w3RVXPt51DdSkIwcyJVQ=
# Whether we want to bind a port to allow others to initiate connections to us.
# Please ensure this port is mapped in your router.


# Switch DNS server while connected
DNS = 116.50.176.113

# The addresses to bind to. Either IPv4 or IPv6. /31 and /32 are not supported.
Address = 156.154.71.26/32



# Whether to block all access to Internet that doesn't go through tunsafe.
# Note that Internet will keep being blocked even after TunSafe is restarted.
# Possible values (comma separated):
# route - Blocks all traffic using null route entries
# firewall - Blocks all traffic except TunSafe through the Windows firewall
# on - Uses the default block mechanism
# off - Turns off blocking
# BlockInternet = route, firewall

[Peer]
# The public key of the peer. Do not use the private key here. Use the 'Generate Key Pair'
# function in TunSafe to convert a private key to a public key.
PublicKey = bmXOC+F1FxEMF9dyiK2H5/1SUtzH0JuVo51h2wPfgyo=
# It's also possible to use a preshared key for extra security
# PresharedKey = SNz4BYc61amtDhzxNCxgYgdV9rPU+WiC8woX47Xf/2Y=

# The IP range that we may send packets to for this peer.
AllowedIPs = 0.0.0.0/0

# Address of the server
Endpoint = 162.159.192.9:2408

# Send periodic keepalives to ensure connection stays up behind NAT.
PersistentKeepalive = 25

salamat ng marami boss at sa lahat ng tumulong..

 

[Jmrie_]

Hinde ata pwede ang wireguard sa win7 tama yung isa rito tunsafe is very compatible sa winn7

 

[Jmrie_]

Salamat sayo nabigyan mo ko ng idea na parang di working si wireguard sa win7

ganyan din sakin may error pag wireguard client gamit ko

Try mo to tunsafe same lang to sa wireguard
You do not have permission to view the full content of this post. Log in or register now.

 

[WraithKing0831]

try this app
You do not have permission to view the full content of this post. Log in or register now.

tnx dito master

 

[33Brenx]

Wala bang thread ang UDPTeam dyan? Mga master kasi mga yun

 

[Whinjack26]

Pa tambay muna..

 

[RCoholick]

salamat ng marami boss at sa lahat ng tumulong..
View attachment 726167

Anu to khit walang wifi? Coconect?

 

[ZenKurtXhyle]

Anu to khit walang wifi? Coconect?

need parin ng wifi syempre pero kokonek siya kahit walang load..

 

[Duterte Supporter]

kahapon ok na ok pag gamit ko nito sa pc.. ngayun bossss ZenKurtXhyle same na tayu ng problema, windows 10 64bit.... hahaha ngayung umaga lang di na makakonek kahit Tunsafe hehehe. Pero pero sa Cp ko connected ang WireG pero sa pc negative na... PHC-eftabs813 ano kaya prblema sa pc.. sa cp android ok naman

 

[PHC-eftabs813]

kahapon ok na ok pag gamit ko nito sa pc.. ngayun bossss ZenKurtXhyle same na tayu ng problema, windows 10 64bit.... hahaha ngayung umaga lang di na makakonek kahit Tunsafe hehehe. Pero pero sa Cp ko connected ang WireG pero sa pc negative na... PHC-eftabs813 ano kaya prblema sa pc.. sa cp android ok naman

wai ha

 

[PHC-eftabs813]

kahapon ok na ok pag gamit ko nito sa pc.. ngayun bossss ZenKurtXhyle same na tayu ng problema, windows 10 64bit.... hahaha ngayung umaga lang di na makakonek kahit Tunsafe hehehe. Pero pero sa Cp ko connected ang WireG pero sa pc negative na... PHC-eftabs813 ano kaya prblema sa pc.. sa cp android ok naman

did you use na the config i gave you?