What's new

Tutorial [gᴜɪᴅᴇ] ʜᴏᴡ ᴛᴏ ғʟᴀsʜ ᴀ ᴏᴘᴘᴏ ᴅᴇᴠɪᴄᴇ [ʙᴀsᴇᴅ ᴏɴ ǫᴜᴀʟᴄᴏᴍᴍ]

Shinsuke Nishizono

Wimpy Kid
Joined
Aug 3, 2016
Posts
11,839
Solutions
1
Reaction
6,894
Points
3,823
Panno ba mag-flash ng firmware sa Oppo with the Qualcomm SnapDragon Processor?

Kasi most members here in PHCorner, nagtatanong kung panno ba magflash?

So sa mga naghahanap, eto na po. Ok?

[DISCLAIMER : Do at your own risk. Isang maling input, bye-bye. (DEADBOOT PHONE).]

For this tutorial reference, i gonna using Oppo A37.

Reason : Encryption Unsuccessful , Bootloop.


full


Let's get started.
First you need,

  • A Oppo Firmware on your Device.
  • QHSUSB 9008 Usb Drivers
  • USB Cable
  • PATIENCE.
PT.1 - Installing the drivers

1. Press and hold volume up and down and connect usb , para madetect ng QHSUSB_BULK na device. Since error sa installation. Wala pa ngang driver. So install na natin siya ngayon, but DO NOT Remove ng phone until hindi pa nakainstalled ng tamang driver.

2. Extract mo yung QHSUSB 9008 USB Drivers sa gusto mo ilagay. (Preferred : Desktop :) )

3. Press Windows Key + R , and type devmgmt.msc .

4. Now sa Other Devices , makikita mo yung QHSUSB_BULK sa device manager mo. Now, right click on it, then select "Update Driver Software".

5. Click on "Browse on my computer for driver software."
Now sa installation path , browse mo yung drivers kung saan mo iniextract ng drivers.

6. Once done , click Next. Then meron lalabas na warning. Just click "Install Driver Anyway."

7. Done, meron ka nang drivers sa flashing.

PT.2 - Flashing Firmware

1. Download mo yung phone firmware mo. (NOTE: To be exact model, otherwise. JTAG ng abot niyan. Be careful!)

2. Once done , extract the firmware file. Then open the firmware folder.

3. Open MSM8x39 Download Tool.exe .

full


4. To start flashing, hold Volume UP and Volume Down and connect sa usb.

full


full


5. When says "Com Device" sa Device type click start. Until magprocess na siya from Download Mode to Diagnostic mode.

full


6. Relax, iniinstall ulit ng driver. Nothing wrong about it.

full


7. After sucess flashing , hold power button for 10 secs then release and press power button , until magvibrate.

full


Done!

full


Now you know. (READ)
⬇⬇⬇
Multi boot binary firmware image (.mbn) ginagamit ng iba't ibang mga Android device, higit sa lahat Samsung mobile phone; na naglalaman ng binary data para sa mga partition memory ng internal, tulad ng mga mapagkukunan at power manager, pangalawang bootloader, bootloader AP. ginagamit upang i-update ang firmware sa isang Android device.

Important NOTE:
Cannot give any links sa firmware. Kasi marami naman nag kalat sa Google. So use Google Sometimes.

If have any questions , feel free to comment down here.

I WON'T ANSWER , SA MGA KUMUKUHA NG ATTENSYON. HINDI FB ITO PARA MAGPASIKAT. AS SIMPLE AS THAT.:)

Just passing by...

If this was helpful to you, hit :)!

x57W3zUPe59QmavTrhfW-9-SiS1g6w9tQngAF94ChjihV53xxFNzSWUsye8PqGO_Ob3SSLQ_CCbTm7zjDVUtUhIm8mE4P5863z5x1doI8ahdpx8dxWSa4pchYQA9oXhJBSDJRaq2GZye_GXQPHyEoCOpjFqIy_0=w325-h179-nc


Thanks for visiting!
 
Last edited by a moderator:
hi po pwede ba to sa deadboot na oppo mirror 3 phone ko pero ndedetect ps sya and QHSUSB_BULK driver pano po isesearch need pba ilagay kung anot unit ng phone? thanks po
 
Back
Top