What's new

Closed Cherry mobile flare s5 mini firmware

Status
Not open for further replies.

PHC - JabonilloXD

Forum Veteran
Joined
Nov 29, 2016
Posts
1,457
Reaction
1,060
Points
590
Age
26
Tutorial On How to Flash/Reprogram Flare S5 Mini

Things you need:
PC
Drivers
Firmware
USB Cable
And Also your Phone

Installing Drivers

Step 1

You do not have permission to view the full content of this post. Log in or register now.
Download This

Step2
After download, extract anywhere in your computer, Open extracted SCI-android-usb-driver-jungo-v4 folder then select system type if 32-bit or 64-bit.
- To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).

Step 3
Then run DPInst.exe. Just click next until it finish installing

Download The Firmware PAC File

Go to this page and Download it
You do not have permission to view the full content of this post. Log in or register now.

The Password is :moxxxphcorner


Flash Pac file Stock Rom

You do not have permission to view the full content of this post. Log in or register now.
Download This
  1. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
    NOTE:
    UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.


  2. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open. follow this screenshot.

  3. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.

  4. Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.

  5. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

How to Bypass FRP in Cherry Mobile Flare S5 mini
  1. In ResearchDownload Click on Settings, Select Flash Operations tab.
  2. In Erase Flash, Check Erase All Flash then click ok.
  3. Now click Start Downloading.
  4. Turn off your phone and press Volume Up the Insert USB Cable to PC.
  5. Now wait till finish downloading and you will see Passed.

Feed Back
Palike na rin
 
natry ko na si kingo at king root still di pa rin ma root, and based on my research di ata pa ata ma root ito dahil una Spreadtrum, pangalawa android 6 na.. di pa ata supported nila ang rooting ng spreadtrum marshmallow, so sad naman oh huhu..
 
Status
Not open for further replies.

Similar threads

Back
Top