odilonser1
Addict
Hello, everyone,
do you have any idea to unbrick ZLT S10 using UART method ?
I change index home page file on it and after the device can't boot correctly.
When i try to Open the Serial Com port with Putty, (rx, tx, gnd)
it detected but the u-boot loading is still looping.
Thank you
.
Logs...
do you have any idea to unbrick ZLT S10 using UART method ?
I change index home page file on it and after the device can't boot correctly.
When i try to Open the Serial Com port with Putty, (rx, tx, gnd)
it detected but the u-boot loading is still looping.
Thank you
Logs...
Inc zloader 1.3.4
spi-nand:init ok.
bbt ok.
read uboot ok.
start uboot...
U-Boot 2011.09 (Mar 12 2022 - 21:11:22) for ZXIC
U-Boot code: 0x23DF0000 -> 0x23E3FF24 BSS: -> 0x23F021CC
CPU: ZX297520V3
Board: ZX297520V3
monitor len: 0x00200000
ramsize: 0x04000000
TLB table at: 0x23ff0000
Top of RAM usable for U-Boot at: 0x23ff0000
Reserving 2048k for U-Boot at: 0x23df0000
Reserving 16k for nand dma buffer at: 0x23dec000
Reserving 2080k for malloc() at: 0x23be4000
Reserving 24 Bytes for Board Info at: 0x23be3fe8
Reserving 120 Bytes for Global Data at: 0x23be3f70
New Stack Pointer is: 0x23be3f60
RAM Configuration:
Bank #0: 0x20000800 64 MiB
relocation Offset is: 0x00000000
dram_bank_mmu_setup: bank: 0
monitor flash len: 0x0004FF24
Now running in RAM - U-Boot at: 0x23DF0000
Using default environment
Destroy Hash Table: 23e40404 table = (null)
Create Hash Table: N=91
DELETE CANDIDATE: "bootargs"
hdelete: DELETE key "bootargs"
DELETE ERROR ##############################
INSERT: free(data = 23be8008)
INSERT: done
In: serial
Out: serial
Err: serial
[UBOOT]NOTICE->[sys_entry]<520>sys_entry ...
[UBOOT]NOTICE->[uboot_init_func]<461>go into uboot init func
[UBOOT]NOTICE->[uboot_init_func]<474>uboot init pull on pshold success
[sys_entry_wdt]: watchdog no reset!
[UBOOT]NOTICE->[uboot_init_func]<474>uboot init wdt_reboot success
[UBOOT]NOTICE->[uboot_init_func]<474>uboot init dma success
[UBOOT]NOTICE->[uboot_init_func]<474>uboot init i2c success
[zx234290_get_boot_reason_prev][START_UP_STATUS = 0x1] ...
[zx234290_get_boot_reason_prev][USER_RESERVED = 0xFF] ...
[UBOOT]NOTICE->[uboot_init_func]<474>uboot init peri success.
.
.
.
.
.
[at][721]: receive client inform str = +ZLC: 0,0,0, fd = 10
[at][721]: at_rcvmsg_handle AT_TYPE_RESPONSE str=OK, at_fd = 10, at_cmd_paras: (null), prefix_len: 2, paras_len: 0
[at][721]: rcvmsg_rsp_at_client context->prefix = ZLC?
[at][721]: rcvmsg_rsp_at_client send msg to app msg_id=0x150e,dst_id=0x100f,rsp_msg_id=0x0
[at][721]: rcv_msg_proc recv usMsgCmd = 0x150e, source is 0x100f
[at][721]: at_write fd=10,len=8,ret=8,data=AT+CSQ
[at][721]: receive client inform str = +CSQ: 151,99,5, fd = 10
[at][721]: at_rcvmsg_handle AT_TYPE_RESPONSE str=OK, at_fd = 10, at_cmd_paras: (null), prefix_len: 2, paras_len: 0
[at][721]: rcvmsg_rsp_at_client context->prefix = CSQ
[at][721]: at_write fd=10,len=9,ret=9,data=AT+ZLC?
[at][721]: receive client inform str = +ZLC: 0,0,0, fd = 10
[at][721]: at_rcvmsg_handle AT_TYPE_RESPONSE str=OK, at_fd = 10, at_cmd_paras: (null), prefix_len: 2, paras_len: 0
[at][721]: rcvmsg_rsp_at_client context->prefix = ZLC?
[at][721]: rcvmsg_rsp_at_client send msg to app msg_id=0x150e,dst_id=0x100f,rsp_msg_id=0x0
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.